TEMPTU

Airpod Pro

The Airpod Pro is a reusable, refillable airbrush cartridge that lets you mix and customize makeup right in the cup, with no airbrush gun to take apart and deep-clean. Just drop in your formula, spray, clean and go. The open, top-feed well holds 2 mL, which is the right size for face work.

Why you'll love it:

• Custom-blend shades directly in the cup
• Reusable for up to 120 uses
• Single action, top gravity feed
• 0.5 mm needle and nozzle for a fine, even spray
• Works with Temptu airbrush makeup, skincare, root touch-up and self-tanner
• Fits all compressors when used with the matching Airpod airbrush
• Great for beauty and body art

Pro tips:

• Clean the Airpod with the right cleaner and a long, thin-bristle brush (not included) between colors and formulas, and after every use.
• Give each formula its own Airpod (for example, one for foundation, one for shimmer and one for tanner) for the best performance and easiest cleanup.

Airbrush device sold separately.

Prepping your Airpod Pro

Remove the tamper seal and cap. If it is the first time you are using this Airpod Pro, prime it by putting 1-2 drops of S/B Airbrush Cleaner (sold separately) over the inner well and pulling gently on the clear loop once. Line up the Airpod Pro with the TEMPTU One or TEMPTU Air and slide it into place until it clicks. Power on and spray cleaner through.

Attaching your Airpod Pro

Press down on the round release button on the side of the device and slide the Airpod Pro, window side up, into the device until it clicks into place.

Press down on the round release button on the side of the device and pull downward on the Airpod Pro to remove it from the device.

STEP 1: Insert 7-10 drops of makeup into the inner well of the Airpod Pro, needle should be fully covered.

STEP 2: Blend with the TEMPTU Cleaning & Mixing Brush if mixing colors (sold separately).

STEP 3: Snap clear cap onto well for spill-free application.

Hold the device about four fingers from the face. Always moving in small, circular motions for a seamless, even finish.

Use a light touch with the SoftTouch Control when applying makeup to the face. TEMPTU makeup is weightless and buildable - a little goes a long way.

Stop and look between passes until reaching the desired level of coverage.

• 1-2 passes for sheer coverage
• 2-3 passes for medium coverage
• 3-4 passes for full coverage

Tips to avoid a wet, heavy or uneven finish:

• Do not hold One too close to skin
• Do not move in a back-and-forth motion
• Do not press too hard on the SoftTouch Control

STEP 1: Drop S/B Airbrush Cleaner into the inner well of the Airpod Pro after using TEMPTU makeup or between colors.

STEP 2: Use TEMPTU Cleaning & Mixing Brush to clean around and under the needle.

STEP 3: Spray completely through.

STEP 4: Repeat as needed until spray is clear.

STEP 5: When finished, regardless of formula used, always clean the Airpod Pro thoroughly with Alcohol 99% so it is ready to use for the next application.

STEP 6: Never leave makeup sit in the Airpod Pro to dry or harden.

Tip: For no-mess cleaning, spray into Airbrush Cleaning Pot (sold separately).

• Never soak or submerge the Airpod Pro in alcohol.
• Never store makeup or other products inside the Airpod Pro.
• Each Airpod Pro is designed to last up to 120 uses with proper care and depending on frequency of use.
• To care for the TEMPTU Cleaning & Mixing Brush, it is best to clean the brush after and smooth the bristles down to help dry back to shape.