SP-35 Dual Action Airbrush Gun
Features dual action technology with a push-and-pull trigger that separates the activation for air and makeup. A workhorse for all pro beauty applications, this more advanced airbrush gun is perfect for face, body and fine detail work.
A pro workhorse for detailed airbrush work. The Temptu SP-35 is a dual-action airbrush gun: push the trigger down for air, pull it back for makeup. Because air and color are controlled separately, you get maximum control over flow, from a soft, sheer mist to fine, precise lines.
Why you'll love it:
What's included:
Compressor, airhose and makeup sold separately.
Assemble your SP 35 Airbrush Gun
Using airbrush wrench (part 24) or your fingers, place the brass nozzle on the front of the airbrush gun. Screw on the nozzle to the tip of the airbrush gun until securely tightened. Screw on the nozzle cap. Screw on the needle cap.
Hold the airbrush gun in your hand at a 45 degree angle, insert the trigger sideways into the body, and twist so the lines face the front of the airbrush body. With the body at an angle, grasp the needle chucking guide and insert it into the back of the airbrush gun. This action will push the trigger forward.
Slide the spring over the needle chucking guide. Screw on the spring case, twisting clockwise. Gently insert the needle. Screw on the needle chucking nut. Screw on the handle. Your SP 35 Airbrush Gun is now assembled!
How to Use your SP 35 Airbrush Gun
Attach the airbrush gun to compressor hose using the metal screw on connector. Drop makeup into airbrush cup. For use with airbrush foundation, start with 4 to 6 drops of makeup. For blush, highlighter, and other colors, start with 3 to 4 drops.
Turn on compressor and bring airbrush gun up to 4 to 6 inches from face. Begin makeup application. Always start by releasing air first, pressing down on trigger to release air. Next, pull back on trigger to release makeup. Make sure the air is on at all times during application. Pull back on trigger for makeup control.
Apply airbrush makeup in small circular motions. Keep moving and watch carefully so as not to overspray. It is important to stop periodically and review your work. Move the airbrush gun 4 to 6" away from the face as necessary and adjust the dial pressure on the compressor as needed.
How to Clean your SP 35 Airbrush Gun
Flush the airbrush gun between colors, using a cleaner appropriate for the formula in use. For silicone/oil based formulas use, S/B Airbrush Cleaner. For alcohol based formulas, use Alcohol 99%. For water based formulas, use water. Add a few drops of cleaning solution to the cup. Using a cotton swab or small brush, swish the cleaning solution around the cup. Spray the solution through the airbrush gun onto a tissue or into a cleaning pot.
