Split Lip
Out of Kit Split Lip (TRSP01-0180)
This little piece is great for adding a split lip SFX makeup look.
Product Dimensions: 1" x 0.75" x 0.0625"
The peel-and-stick silicon prosthetic appliance goes on like a Band-Aid, then all you have to do is blend the edges. With the attached adhesive, it couldn’t be easier. There is nothing to mix, no fumed silicates to avoid inhaling.
If you want to achieve a more complex design, you can layer pieces as desired and blend the pieces together. With only half the thickness of Bondo appliances, Out of Kit pieces are very flexible and move naturally.
Yes, if you're very careful, you can use a brush and 99% alcohol to lift the piece back off of the artist and reposition it.
So far we haven’t found a make-up that doesn’t work on the pieces.
Yes, Out of Kit prosthetics pieces have worked fine in temperatures as cold as -10 degrees
Yes, if the correct skin prep is done and the pieces are sealed properly, you should have no problems in high humidity.
It is recommended to apply 1-2 layers of sealer either sprayed or painted onto the piece and back onto the skin. Here are some sealers we like
Using a soft brush or a powder puff, gently massage the skin where the piece is and slowly remove the prosthetic. We recommend the following removers to use in the aid of removing the pieces.
